PLANET MGSD-10080F - Manual (Page 534)

User’s Manual of MGSD-10080F
534
Example:
Set the port policer rate in 1000
MGSD-10080F:/>qos Port Policer Rate 1-10 1000
QoS Port Policer Unit
Description:
Set or show the port policer unit.
Syntax:
QoS Port Policer Unit [] [kbps|fps]
Parameters:
: Port list or 'all', default: All ports
kbps : Unit is kilo bits per second
fps : Unit is frames per second
(default: Show port policer unit)
Default Setting:
kbps
Example:
Set the port policer unit in fps
MGSD-10080F:/>qos Port Policer unit 1-10 fps
QoS Port Policer Flow Control
Description:
Set or show the port policer flow control.
If policer flow control is enabled and the port is in flow control mode, then pause frames are sent instead of discarding
frames.
Syntax:
QoS Port Policer FlowControl [] [enable|disable]
Parameters:
: Port list or 'all', default: All ports