PLANET MGSD-10080F - Manual (Page 135)

User’s Manual of MGSD-10080F
135
for all VLANs configured by a selected VLAN User (selection will be allowed by a
Combo Box). When ALL VLAN Users is selected, it will show this information for
all the VLAN Users, and this is the default. VLAN membership allows the frames
Classified to the VLAN ID to be forwarded to the respective VLAN member ports.
•
VLAN User A VLAN User is a module that uses services of the VLAN management
functionality to configure VLAN memberships and VLAN port configuration such
as PVID, UVID. Currently we support the following VLANs :

CLI/Web/SNMP : This is referred as static.

NAS : NAS provides port-based authentication, which involves
communications between a Supplicant, Authenticator, and an
Authentication Server.

MVR : MVR is used to eliminate the need to duplicate multicast traffic for
subscribers in each VLAN. Multicast traffic for all channels is sent only
on a single (multicast) VLAN.

Voice VLAN : Voice VLAN is a VLAN configured specially for voice
traffic typically originating from IP phones.
- MSTP : The 802.1s Multiple Spanning Tree protocol (MSTP) uses VLANs to
create multiple spanning trees in a network, which significantly improves
network resource utilization while maintaining a loop-free environment.
Buttons
: Select VLAN Users from this drop down list.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.
: Updates the table starting from the first entry in the VLAN Table, i.e. the entry with the lowest VLAN ID.
: Updates the table, starting with the entry after the last entry currently displayed.