PLANET MGSD-10080F - Manual (Page 235)

User’s Manual of MGSD-10080F
235
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Return to the previous page.
4.10.4 ACL Ports Configuration
Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE.
The ACL Ports Configuration screen in Figure 4-10-4 appears.
Figure 4-10-4: ACL Ports Configuration Page Screenshot
The page includes the following fields:
Object Description
•
Port The logical port for the settings contained in the same row.
•
Policy ID Select the policy to apply to this port. The allowed values are 1 through 8. The
default value is 1.
•
Action Select whether forwarding is permitted ("Permit") or denied ("Deny"). The default
value is "Permit". All means all ports will have one specific setting.
•
Rate Limiter ID Select which rate limiter to apply to this port. The allowed values are Disabled
or the values 1 through 15. The default value is "Disabled". All means all ports
will have one specific setting.