PLANET MGSD-10080F - Manual (Page 328)

User’s Manual of MGSD-10080F
328
604800 seconds (7 days). A value of zero will keep a port disabled (until next
device restart).
Port Configuration:
Object Description
•
Port The switch port number of the port.
•
Enable Controls whether loop protection is enabled on this switch port.
• Action
Configures the action performed when a loop is detected on a port. Valid values
are Shutdown Port, Shutdown Port and Log or Log Only.
• Tx Mode
Controls whether the port is actively generating loop protection PDU's, or
whether it is just passively looking for looped PDU's.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.16.2 Status
This page displays the loop protection port status the ports from the Managed Switch.
Figure 4-16-2: Loop Protection Status Page Screenshot
The page includes the following fields:
Object Description
•
Port The switch port number of the logical port.
•
Action The currently configured port action.
• Transmit The currently configured port transmit mode.
• Loops The number of loops detected on this port.