2 detailed mep configuration – PLANET MGSD-10080F User Manual
Page 342

User’s Manual of MGSD-10080F
342
• Domain
Port: This is an MEP in the Port Domain. 'Flow Instance' is a Port.
Esp: Future use
Evc: This is an MEP in the EVC Domain. 'Flow Instance' is an EVC
Mpls: Future use
• Mode
MEP: This is a Maintenance Entity End Point.
MIP: This is a Maintenance Entity Intermediate Point.
• Direction
Ingress: This is an Ingress (down) MEP - monitoring ingress traffic on
'Residence Port'.
Egress: This is an Egress (up) MEP - monitoring egress traffic on 'Residence
Port'.
• Residence Port
The port where MEP is monitoring - see 'Direction'.
• Level
The MEG level of this MEP.
• Flow Instance
The MEP is related to this flow - See 'Domain'.
• Tagged VID
Port MEP: An outer C/S-tag (depending on VLAN Port Type) is added with this
VID.
Entering '0' means no TAG added.
• This MAC
The MAC of this MEP can be used by other MEPs when unicast is selected (Info
only).
• Alarm
There is an active alarm on the MEP.
Buttons
: Click to add a new MEP entry
: Click to refresh the page immediately.
: Click to save changes.
:
Click to undo any changes made locally and revert to previously saved values.
4.19.2 Detailed MEP Configuration
This page allows the user to inspect and configure the current MEP Instance.; screen in
Figure 4-19-2
appears.