PLANET MGSD-10080F - Manual (Page 523)

User’s Manual of MGSD-10080F
523
MEP LCK configuration
'prio' is the priority (PCP) of transmitted AIS frame
'1s|1m' is the number of AIS frame pr. second.
Syntax:
MEP lck config [] [] [1s|1m] [enable|disable]
Parameters:
: Instance number
: OAM PDU priority
1s|1m : Transmit period for LCK
1s - to send OAM Frames in the rate of 1 per second
1m - to send OAM frames in the rate of 1 per minute
enable|disable: enable/disable
MEP Link Trace Configuration
Description:
MEP Link Trace configuration
'prio' is the priority (PCP) of transmitted LTM frame
'mac_addr' is the unicast MAC of target MEP/MIP
'mep' is the peer MEP-ID of target MEP - only used if 'mac_addr is 'all zero'
'tll' is the TLL in the transmitted LTM.
Syntax:
MEP lt config [] [] [] [] [] [enable|disable]
Parameters:
: Instance number
: OAM PDU priority
: MAC address ('xx-xx-xx-xx-xx-xx' or 'xx.xx.xx.xx.xx.xx' or 'xxxxxxxxxxxx', x is a hexadecimal digit)
: This MEP id (0-0x1FFF)
: LT - Time To Live
enable|disable: enable/disable
MEP Loop Back Configuration
Description: