PLANET MGSD-10080F - Manual (Page 33)

User’s Manual of MGSD-10080F
33
Port Configuration
Port Disable / Enable
Auto-Negotiation 10/100/1000Mbps Full and Half Duplex Mode Selection
Flow Control Disable / Enable
Bandwidth Control on Each Port
Power Saving Mode Control
Port Status
Display Each Port’s Speed Duplex Mode, Link Status, Flow Control Status.
Auto Negotiation Status, Trunk Status.
Port Mirroring
TX / RX / Both
1 to 1 Monitor
VLAN
802.1Q Tagged based VLAN, up to 255 VLAN Groups
Q-in-Q Tunneling
Private VLAN Edge (PVE)
MAC-based VLAN
Protocol-based VLAN
Voice VLAN
MVR (Multicast VLAN Registration)
Up to 255 VLAN Groups, Out of 4094 VLAN IDs
Link Aggregation
IEEE 802.3ad LACP / Static Trunk
Supports 5 Groups of 8-Port trunk Support
QoS
Traffic Classification based, Strict Priority and WRR
8-Level Priority for Switching
- Port Number
- 802.1p Priority
- 802.1Q VLAN Tag
- DSCP/TOS Field in IP Packet
IGMP Snooping
IGMP (v1/v2/V3) Snooping, up to 255 Multicast Groups
IGMP Querier Mode Support
MLD Snooping
MLD (v1/v2) Snooping, up to 255 Multicast Groups
MLD Querier Mode Support
Access Control List
IP-based ACL / MAC-based ACL
Up to 123 Entries
Bandwidth Control
Per Port Bandwidth Control
Ingress: 500Kb~1000Mbps
Egress: 500Kb~1000Mbps
Management
Basic Management Interfaces Console, Telnet, Web Browser, SNMPv1, v2c and v3
Secure Management Interface SSH, SSL, SNMP v3
SNMP MIBs
RFC-1213 MIB-II
IF-MIB
RFC-1493 Bridge MIB
RFC-1643 Ethernet MIB
RFC-2863 Interface MIB
RFC-2665 Ether-Like MIB
RFC-2819 RMON MIB (Group 1)
RFC-2737 Entity MIB
RFC-2618 RADIUS Client MIB