PLANET MGSD-10080F - Manual (Page 217)

User’s Manual of MGSD-10080F
217
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.9.14 Storm Control Configuration
Storm control for the switch is configured on this page.
There is a unicast storm rate control, multicast storm rate control, and a broadcast storm rate control. These only affect flooded
frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.
The configuration indicates the permitted packet rate for unicast, multicast or broadcast traffic across the switch. The Storm
Control Configuration screen in Figure 4-9-17 appears.
Figure 4-9-17: Storm Control Configuration Page Screenshot
The page includes the following fields:
Object Description
•
Frame Type The settings in a particular row apply to the frame type listed here:

unicast

multicast

Broadcast
•
Enable Enable or disable the storm control status for the given frame type.
•
Rate The rate unit is packets per second (pps). Valid values are: 1, 2, 4, 8, 16, 32, 64,
128, 256, 512, 1K, 2K, 4K, 8K, 16K, 32K, 64K, 128K, 256K, 512K , 1024K,
2048K, 4096K, 8192K, 16384K or 32768K.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.