PLANET MGSD-10080F - Manual (Page 380)

User’s Manual of MGSD-10080F
380
Port Power
Description:
Set or show the port PHY power mode.
Syntax:
Port Power [] [enable|disable|actiphy|dynamic]
Parameters:
: Port list or 'all', default: All ports
enable : Enable all power control
disable: Disable all power control
actiphy: Enable ActiPHY power control
dynamic: Enable Dynamic power control
Default Setting:
disable
Example:
Disable port power function for port1-4
MGSD-10080F:/>port power 1-4 enable
Port Excessive
Description:
Set or show the port excessive collision mode.
Syntax:
Port Excessive [] [discard|restart]
Parameters:
: Port list or 'all', default: All ports
discard : Discard frame after 16 collisions
restart : Restart backoff algorithm after 16 collisions
(default: Show mode)
Default Setting:
Discard