Avago Technologies AcceleRAID 150 - Manual (Page 20)

Controller Installation (Standard)
2-6 AcceleRAID 150 Installation Guide
Controller Installation (Standard)

Caution
Anti-static handling procedures are required. Leave
the controller in its anti-static bag until it is time to
plug it into the PCI slot.
Wearing a grounded wrist strap (see Figure 2-2),
having the power cord plugged into an electric-ground
wall outlet, having the computer power turned off, and
following other ESD protective measures are highly
recommended. See warning below about unplugging
the power cord when the computer cover is removed.
Figure 2-2. Wear a grounded wrist strap.

WARNING
Disconnect the system from the electrical wall
outlet before opening the system cabinet. Working
with the system covers off and power applied to the
system can result in shock and serious injury.