Avago Technologies AcceleRAID 150 - Manual (Page 13)

Introduction
Manual No. 775020 1-5
User-supplied Items
The following user-supplied items are required to perform this installation:
• Host system with a PCI slot, or
• Host system with a prewired SISL supported PCI slot in order to use
the SISL feature
• SCSI cables to connect SCSI channels to disk drives
• Operating system software
• Static grounding strap or electrostatic discharge (ESD) safe work area
• Disk array enclosure (or equivalent) and SCSI disk drives
☛
Note
The supported SCSI drive types include Ultra2 SCSI
with LVD as well as the following single-ended SCSI
types: SCSI-1, Fast SCSI, Wide Fast SCSI, Ultra
SCSI, and Wide Ultra SCSI.
Figure 1-3. AcceleRAID 150 External Connector (0.8mm UHD Centronics 68F):
68-Pin Very High Density Cable Interconnect (VHDCI)
Figure 1-4. AcceleRAID 150 Internal Connector (HD DB68F):
68-Pin High Density