Enterasys Networks Security Router X-PeditionTM User Manual
Page 67
Utilizing the Command Line Interface
XSR User’s Guide 2-31
4.
Using TFTP, transfer
updateBootrom.fls
from the network:
XSR-1805#
copy tftp://192.168.27.95/C:/tftpDir/ updateBootrom.fls
flash:updateBootrom.fls
Copy 'tftpDir/updateBootrom.fls' from server
as 'updateBootrom.fls' into Flash(y/n) ?
y
!!!!!!!!!!!!!!!!!!!!!!!!!!
Download from server done
File size: 667172 bytes
5.
Copy
boot-config
to
restore-boot-config
:
XSR-1805#
copy flash:boot-config flash:restore-boot-config
Copy 'boot-config' from flash: device
as 'restore-boot-config' into flash: device(y/n) ?
y
copying file flash:boot-config -> flash:restore-boot-config
Copy OK: 12 bytes copied
12 bytes copied
6.
Reconfigure
boot-config
to boot
updateBootrom.fls
:
XSR-1805(config)#
boot system updateBootrom.fls
updateBootrom.fls saved into flash:boot-config
7.
Display the current list of files and the contents of
boot-config
and
restore-boot-config
to
verify the transfers went smoothly:
XSR-1805#
dir
Listing Directory flash:/
size
date time name
208
OCT-31-2002 09:34:16 startup-config
3244017
OCT-31-2002 09:32:46 xsr1800.fls
820136
OCT-31-2002 09:40:42 bootrom.fls
667172
OCT-31-2002 09:42:06 updateBootrom.fls
18
OCT-31-2002 09:44:10 boot-config
12
OCT-31-2002 09:43:44 restore-boot-config
1,984,512 bytes free
6,727,680 bytes total
XSR-1805#
more boot-config
updateBootrom.fls
XSR-1805#
more restore-boot-config
xsr1800.fls
8.
This is a critical step and all previous steps must be completed accurately before proceeding.
Reload and wait a couple of minutes. You will lose your Telnet session as the system reboots.
The XSR will run
updateBootrom.fls
and update the Bootrom into the boot flash sectors.
Power must not be interrupted since a power failure or interruption may render the XSR
unusable. The file,
restore-boot-config
, will be renamed to boot-config and
updateBootrom.fls
and
bootrom.fls
will be removed before the router is rebooted again.
XSR-1805#reload
Proceed with reload (y/n) ?
y
9.
Verify that the system is up by remotely logging in via Telnet. Enter
show version and
check the new Bootrom version.