Enterasys Networks Security Router X-PeditionTM - Manual (Page 434)

System Alarms and Events
A-12 Alarms/Events, System Limits, and Standard ASCII Table
T1E1 Receive Remote Alarm Indication (Yellow
Alarm). Indicates that T1/E1 physical port is detecting RAI Alarm.
T1E1 Receive RAI alarm cleared. Indicates that T1/E1 physical port is not detecting RAI Alarm.
T1E1 Receive Alarm Indication Signal (Blue Alarm). Indicates that T1/E1 physical port is detecting AIS Alarm.
T1E1 Receive AIS cleared. Indicates that T1/E1 physical port is not detecting AIS Alarm.
T1 Cablelength long failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Cablelength short failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Bert start failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Bert profile failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Bert abort failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Clear controller counter failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Load channel failed for slot/card/port:channel. Load command sent to driver returned an error.
T1 Unload channel failed for slot/card/port:channel. Unload command sent to driver returned an error.
T1 Start channel failed for slot/card/port:channel. Start command sent to driver returned an error.
T1 Delete channel interface failed for slot/card/
port:channel. Interface object delete could not be executed.
T1 Create channel interface failed for slot/card/
port:channel. Interface object create could not be executed.
T1 Clock source failed for slot/card/port. Configuration command sent to driver returned an error.
T1 CRC failed for slot/card/port:channel. Configuration command sent to driver returned an error.
T1 FDL failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Framing failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Invert data failed for slot/card/port:channel. Configuration command sent to driver returned an error.
T1 Linecode failed for slot/card/port. Configuration command sent to driver returned an error.
T1 Loopback configuration failed for slot/card/port. Loopback command sent to driver returned an error.
T1 Loopback stop failed for slot/card/port. Loopback stop command sent to driver returned an error.
T1 Load controller failed for slot/card/port. Load command sent to driver returned an error.
T1 Unload controller failed for slot/card/port. Unload command sent to driver returned an error.
T1 Start controller failed for slot/card/port. Start command sent to driver returned an error.
T1 Stop controller failed for slot/card/port. Stop command sent to driver returned an error.
T1 Bind controller failed for slot/card/port. Bind command sent to driver returned an error.
T1 Delete controller object failed for slot/card/port. T1E1 controller object delete could not be executed.
T1 Create controller object failed for slot/card/port. T1E1 controller object create could not be executed.
SYNC_
DRIV Recoverable error XSR has a hard recoverable error.
Table A-8 Low Severity Alarms/Events (continued)
Module Message Description