Enterasys Networks Security Router X-PeditionTM - Manual (Page 465)

Enterasys Syslog Client MIB
XSR User’s Guide B-23
• etsysSyslogServerAddressType The type of Internet address by which the Syslog server is specified in
etsysSyslogServerAddress.
• etsysSyslogServerAddress The Internet address for the Syslog message server.
• etsysSyslogServerUdpPort The UDP port number the client is using to send requests to this server.
• etsysSyslogServerFacility Syslog facility (local0-local7) to be encoded in messages sent to this server.
• etsysSyslogServerSeverity Maximum severity level of messages that should be forwarded to the syslog
server. The higher the level, the lower the severity.
• etsysSyslogServerMessagesIgnored A count of messages not sent to this server because the severity level of the
message was above etsysSyslogServerSeverity; the higher the level, the
lower the severity.
• etsysSyslogServerRowStatus Allows for the dynamic creation and deletion of entries within the
etsysSyslogServerTable as well as activation/deactivation of these entries.
When this object's value is set to notInService(2) this server will not be sent
any messages, nor will any of its counters be incremented.
Syslog Server Defaults
etsysSyslogServerDefaultUdpPort Default UDP port number that the managed entity uses to send syslog
messages.
This value will be used as the default value for etsysSyslogServerUdpPort
when creating rows in the etsysSyslogServerTable and either:
• no value is specified for etsysSyslogServerUdpPort, or
• etsysSyslogServerUdpPort is implemented read-only.
etsysSyslogServerDefaultFacility The default syslog facility (local0-local7) to be encoded in syslog messages.
This value will be used as the default value for etsysSyslogServerFacility when
creating rows in the etsysSyslogServerTable and either:
• no value is specified for etsysSyslogServerFacility, or
• etsysSyslogServerFacility is implemented read-only.
etsysSyslogServerDefaultSeverity Default syslog message severity level used to filter all syslog messages.
This value will be used as the default value for etsysSyslogServerSeverity
when creating rows in the etsysSyslogServerTable and either:
• no value is specified for etsysSyslogServerSeverity, or
• etsysSyslogServerSeverity is implemented read-only.
The higher the severity level, the less critical it is.
Units of Conformance
etsysSyslogClientGroup A collection of objects providing syslog message statistics:
• etsysSyslogClientMessages
• etsysSyslogClientMessagesDropped
• etsysSyslogClientLastMessageTime
• etsysSyslogClientControl
Table B-46 Enterasys Syslog Client MIB (continued)
Field Description