TA Triumph-Adler P-4030 MFP User Manual
Page 291
9-4
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
When selecting [Netwk Authentic.]
1
Press the [
▲
] or [
▼
] key to select [NTLM], [Kerberos] or [Ext.] as the server type, and
press the [
OK
] key.
2
Enter the host name (64 characters or less) for the Authentication Server and press the
[
OK
] key.
3
Press the [
▲
] or [
▼
] key to select the domain name for the Authentication Server, and
press the [
OK
] key.
If the domain has not been set, select the number where “----------------” is displayed and press
[Menu]. Select [Edit] and press the [
OK
] key then enter the domain name (in 256 characters or less).
Press the [
OK
] key and the domain will be registered.
To edit or delete a domain name that has already been registered, select that domain name and
press [Menu].
4
When selecting [Ext.] as the server type, enter the port number and press the [
OK
] key.
NOTE
Up to 10 domain names can be registered.
NOTE
If the login user name and password are rejected, check the following settings.
• Network Authentication setting of the machine
• User property of the Authentication Server
• Date and time setting of the machine and the Authentication Server
If you cannot login because of the setting of the machine, login with any administrator
registered in the local user list and correct the settings.