TA Triumph-Adler P-4030 MFP - Manual (Page 109)

3-11
Preparation before Use > Loading Paper
Loading Paper in the Multi Purpose Tray
The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m
2
).
For details of the supported paper sizes, refer to Choosing the Appropriate Paper on page 11-17 . For the paper type
setting, refer to Media Type Set. (Media Type Settings) on page 8-23 . Be sure to use the multi purpose tray when you
print on any special paper.
The capacity of the multi purpose tray is as follows.
• Plain paper (80 g/m 2 ), recycled paper or color paper: 100 sheets
• Thick paper (106 to 220 g/m 2 ): 5 sheets
• Hagaki: 1 sheet
• Envelope DL, Envelope C5, Envelope #10 (Commercial #10), Envelope #9 (Commercial #9),
Envelope #6 (Commercial #6), Envelope Monarch, Youkei 4, Youkei 2: 5 sheets
• OHP film: 1 sheet
1 Open the multi purpose tray.
2 Pull out the support tray section of the MP tray.
IMPORTANT
If you are using a paper weight of 106 g/m 2 or more, set the media type to Thick and set the weight of the
paper you are using.
NOTE
When you load custom size paper, enter the paper size by referring to Specifying Paper Size and Media Type for the
Multi Purpose Tray (MP Tray Setting) on page 3-17 .
When you use special paper such as transparencies or thick paper, select the media type by referring to Specifying
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) on page 3-17 .