TA Triumph-Adler P-4030 MFP - Manual (Page 179)

5-21
Operation on the Machine > Sending
3 Confirm the information.
The connection confirmation screen appears. Press [Yes] to check the connection and [No] to
not check it.
"Connected." appears when connection to the destination is correctly established. If "Cannot
connect." appears, review the entry.
To send to multiple destinations, repeat steps 1 to 3.
Destinations can be changed later. Refer to Checking and Editing Destinations on page 5-21 .
Checking and Editing Destinations
Check and edit a selected destination.
1 Display the screen.
Referring to Specifying Destination on page 5-16 , specify the destination.
2 Check and edit the destination.
Press the [ Confirm/Add Destination ] key.
Add the destination
1 Press [Add].
2 Refer to Specifying Destination on page 5-16 to set the destinations to be added.
Edit the destination
1 Press the [ ▲ ] or [ ▼ ] key to select the destination you want to edit, and press the [ OK ] key.
2 Press the [ ▲ ] or [ ▼ ] key to select [Edit], and press the [ OK ] key.
3 Refer to Specifying Destination on page 5-16 to set the destinations to be added.
Dest. Confirm.:
[email protected]
Exit
[email protected]
Group 01
Add
2 1
Dest. Confirm.:
[email protected]
Exit
[email protected]
Group 01
Add
2 1
[email protected]:
Edit 01
Delete 02