Enabling user login administration, Enabling user login administration -3, Administration – TA Triumph-Adler P-4030 MFP User Manual
Page 290: Display the screen, Enable user login administration
9-3
User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration
Enabling User Login Administration
This enables user login administration. Select one of the following authentication methods:
1
Display the screen.
1
Press the [
System Menu/Counter
] key.
2
Press the [
▲
] or [
▼
] key to select [User/Job Account], and press the [
OK
] key.
3
Press the [
▲
] or [
▼
] key to select [User Login Set.], and press the [
OK
] key.
2
Enable user login administration.
1
Press the [
▲
] or [
▼
] key to select [User Login], and press the [
OK
] key.
2
Press the [
▲
] or [
▼
] key to select [Local Authentic.] or [Netwk Authentic.], and press the
[
OK
] key.
Item
Descriptions
Local Authentication
User authentication based on user properties on the local user list stored in the
machine.
Network Authentication
User authentication based on Authentication Server. Use a user property stored
in Authentication Server to access the network authentication login page.
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
NOTE
Select [Off] to disable user login administration.
Sys. Menu/Count.:
User/Job Account
Exit
04
Counter
03
02
System/Network
Login User Name
Login Password
4000
4000
User Login:
Off
01
Local Authentic.
02
*
Netwk Authentic.
03