TA Triumph-Adler P-4030 MFP - Manual (Page 276)

8-27
Setup and Registration (System Menu) > System Menu
Function Default
Set the defaults for the following functions.
Item Description
Timer
Setting Auto Err. Clear If an error occurs during processing, processing stops to wait for the next step to be
taken by the user. In the Auto Error Clear mode, automatically clear the error after a set
amount of time elapses.
Value : Off, On
Err. Clear Timer If you select [On] for Auto Error Clear, set the amount of time to wait before
automatically clearing errors.
Value : 5 to 495 seconds (in 5 second increments)
NOTE
This function is displayed when [Auto Err. Clear] is set to [On].
Unusable Time *1
*1 Displayed only on products with the fax function installed.
For details, refer to the FAX Operation Guide.
Common Settings Function Default
Item Description
Function
Default Color Selection Select the default color mode for scanning documents.
Value : Auto (Color/Gray), Auto (Color/B&W), Full Color, Grayscale, Black & White
Scan Resolution Select the default scanning resolution.
Value : 200×100dpi Norm., 200×200dpi Fine, 200×400dpi S.Fin, 300×300dpi,
400×400dpi U.Fin, 600×600dpi
FAX Resolution *1
*1 Displayed only on products with the fax function installed.
For details, refer to the FAX Operation Guide.
Orig.Image (Copy) Set the default original document type for copying.
Value : Text+Photo, Photo, Text, Light Text/Line
Orig.Image (Send) Set the default original document type for sending/storing.
Value : Text+Photo, Photo, Text, for OCR, Light Text/Line
Zoom Select the enlarged/reduced default when paper size/sending size changed after the
originals set.
Value : 100%, Auto
Collate Set the defaults for Collate.
Value : Off, On
Orig. Orientation Set the original orientation defaults.
Value : Top Edge on Top, Top Edge on Left
Backgrnd (Copy) Set the default Background Density (Copy).
Value : Off, Auto, Manual (Darker 5)
Backgrnd (Send) Set the default Background Density (Send/Store).
Value : Off, Auto, Manual (Darker 5)