Embedded web server rx, Embedded web server rx -46 – TA Triumph-Adler 2256 User Manual
Page 74
2-46
Installing and Setting up the Machine > Embedded Web Server RX
Embedded Web Server RX
If the machine is connected to the network, you can configure various settings using Embedded Web Server RX.
This section explains how to access Embedded Web Server RX.
For details on Embedded Web Server RX, refer to the Embedded Web Server RX User Guide.
Settings that the administrator and general users can configure in Embedded Web Server RX are as follows.
NOTE
• The optional Network Interface Kit is necessary when connecting the machine to the PC on the network.
• To fully access the features of the Embedded Web Server RX pages, enter the User Name and Password and click
[
Login
]. Entering the predefined administrator password allows the user to access all pages, including Address
Book and Settings on the navigation menu. The factory default setting for the default user with administrator
privileges is shown below.
Setting
Description
Administrator
General User
Device Information
The machine's structure can be checked.
[
Configuration
], [
Counter
], [
About Embedded Web Server
RX
]
Job Status
Displays all device information, including print and scan jobs,
scheduled jobs, and job log history.
[
Printing Job Status
], [
Printing Job Log
], [
Sending Job
Status
]
*1
, [
Scheduled Jobs
, [
Sending Job Log
*1 Displayed only when the optional FAX Kit is installed.
Create, edit, or delete addresses and address groups.
[
Address Book
], [
One Touch Key
]
Device Settings
Configure the advanced settings of the machine.
[
Paper/Feed/Output
], [
Original Document
], [
Energy Saver/
Timer
], [
Date/Time
], [
System
]
—
Function Settings
Configure the advanced function settings.
[
Common/Job Defaults
], [
Copy
], [
Printer
], [
], [
FAX
]
[
Forward Rules
]
, [
Operation Panel
]
—
Network Settings
Configure the network advanced settings.
[
General
], [
TCP/IP
], [
Protocol
]
—
Security Settings
Configure the security advanced settings.
[
Device Security
], [
Network Security
], [
Certificates
]
—
Management
Settings
Configure the advanced management settings.
[
Job Accounting
], [
Administrator Settings
], [
Notification/
Report
], [
SNMP
], [
Reset
]
—
Login User Name
Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1