TA Triumph-Adler 2256 - Manual (Page 171)

7-7
System Menu and Client Tool > Default Settings on the Machine (System Menu)
TCP/IP
Settings IPv6 Setting Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP]
is [On].
IPv6 Select whether to use IPv6.
Value : Off, On
Manual Settings Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address: (numbers (128 bit in total) separated by colons)
Prefix Length: 0 to 128
Default Gateway: (numbers (128 bit in total) separated by colons)
NOTE
This function is displayed when [IPv6] is set to [On].
To enter "Default Gateway", set [RA (Stateless)] to [Off].
RA (Stateless) Select whether to use RA (Stateless).
Value : Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address 1 (to 5)] after restarting the network.
DHCPv6 Setting Select whether to use the DHCP (IPv6) server.
Value : Off, On
NOTE
This function is displayed when [IPv6] is set to [On].
Selecting [On] displays IP address in [IP Address] after restarting the network.
Bonjour Select whether to use Bonjour.
Value : Off, On
Item Description