TA Triumph-Adler 2256 User Manual
Page 140
5-34
Operation on the Machine > Scanning
Scan the Image by Selecting the Destination (Quick Scan)
Select the scan method and destination for each job by using Client Tool.
When Connecting the Machine to the PC via USB
Perform a scan by operating the computer (Host PC) connected to the machine via USB. If the shared folder in the
computer (Client PC) on the network is selected for the destination, an image can be saved on the computer that is not
connected to the machine via USB.
When Connecting the Machine to the PC on the Network
*1
If the machine is connected to the PC on the network, an image can be saved in the PC on the network.
*1 The optional Network Interface Kit is required.
With Quick Scan, the following 3 types of scan are possible.
• Scan to PDF: Saves the scanned image in PDF format.
• Scan to E-mail: Attaches the scanned image to a new E-mail message.
• Scan to Folder: Saves the scanned image to a specified folder.
Client Tool
Host PC
Client PC
Network
USB
Network
Perform a scan by using Client Tool. (Refer to
Scan the Image by Selecting the Destination
(Quick Scan) on page 5-40
1
An image is saved in the folder
set by Client Tool.
2
Network
Network
Network
Perform a scan by using Client Tool. (Refer
to
Scan the Image by Selecting the
Destination (Quick Scan) on page 5-40
1
An image is saved in the folder
set by Client Tool.
2
Network
Client Tool