Power off timer, Display the screen – TA Triumph-Adler 2256 User Manual
Page 50
2-22
Installing and Setting up the Machine > Default Settings of the Machine
Power Off Timer
If the machine is not used while in sleep mode, the power automatically turns off. The Power Off Timer is used to set the
time until the power turns off. The factory setting for the time until the power turns off is 1 hour.
To change the preset power off time, refer to
To use the Power Off Timer, configure the following settings:
•
•
Power Off Rule
Follow the steps below to set whether the power automatically turns off when not used.
1
Display the screen.
1
Press the [
Status/System Menu/Counter
] key.
2
Press the [
▲
] or [
▼
] key to select [Common Settings], and press the [
OK
] key.
3
Press the [
▲
] or [
▼
] key to select [Timer Setting], and press the [
OK
] key.
4
Press the [
▲
] or [
▼
] key to select [Power Off Rule], and press the [
OK
] key.
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password on page 2-10
.
The factory default login user name and login password are set as shown below.
2
1
Status/Sys. Menu:
System
Exit
04
Admin/Accounting
05
Common Settings
06
2
1
Common Settings:
Date Setting
Exit
09
Timer Setting
11
Error Handling
10
Login User Name
Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
2
1
Timer Setting:
Interrupt Clear
Exit
04
Power Off Rule
05
PanelReset Timer
03