Responding to messages, Responding to messages -11 – TA Triumph-Adler 2256 User Manual
Page 229
9-11
Troubleshooting > Troubleshooting
Responding to Messages
If a problem has occurred in the machine, you will be notified by the following display.
• The [
Attention
] indicator on the operation panel is lit or flashing.
• An error message appears in the message display of the machine's operation panel.
If the [
Attention
] indicator is lit or flashing and an error message appears in the message display of the machine's
operation panel, check the Client Tool or Status Monitor.
Problems that can be resolved by the user are described below.
A
C
NOTE
If the indicators light or flash repeatedly in manners not described above, a service error has probably occurred. Turn
off the power, unplug the power cord, and then plug the power cord back in and turn on the power. This may clear the
error. Even if the error is not cleared, contact your service representative.
Error Message
Checkpoints
Corrective Actions
Reference
Page
Add toner.
Toner is empty.
Replace the toner container.
Error Message
Checkpoints
Corrective Actions
Reference
Page
Cannot duplex print on this
paper.
↑↓ (Displayed alternately)
Press OK to continue using
cassette 1.
Did you select a paper size/type that
cannot be duplex printed?
Select [Paper] to select the available
paper. Press the [
OK
] key to print
without using Duplex function.
—
Cannot duplex print on this
paper.
↑↓ (Displayed alternately)
Press OK to continue using
MP tray.
Close document processor
cover.
Is the top cover of the document
processor open?
Close the document processor cover.
—
Close document processor.
Is the document processor open?
Close the document processor.
—
Close front cover.
Is there any cover which is open?
Close the cover indicated on the screen.
—
Close right cover #.
—
Add toner.
Help