Bonjour settings, Display the screen, Configure the settings – TA Triumph-Adler 2256 User Manual
Page 46
2-18
Installing and Setting up the Machine > Default Settings of the Machine
Bonjour Settings
Configure the settings for Bonjour.
1
Display the screen.
1
Press the [
Status/System Menu/Counter
] key.
2
Press the [
▲
] or [
▼
] key to select [System], and press the [
OK
] key.
3
Press the [
▲
] or [
▼
] key to select [Network Setting], and press the [
OK
] key.
4
Press the [
▲
] or [
▼
] key to select [TCP/IP Settings], and press the [
OK
] key.
2
Configure the settings.
1
Press the [
▲
] or [
▼
] key to select [Bonjour], and press the [
OK
] key.
NOTE
If the login user name entry screen appears during operations, log in by referring to
Administrator User Name and Password on page 2-10
.
The factory default login user name and login password are set as shown below.
2
1
Status/Sys. Menu:
System
Exit
04
Counter
03
Report
02
Login User Name
Login Password
Admin
*1
*1 Upper case and lower case letters are distinguished (case sensitive).
Admin
*1
2
1
System:
Network Setting
Exit
01
I/F Block Set.
02
2
1
Network Setting:
TCP/IP Settings
Exit
01
Secure Protocol
02
LAN Interface
03
2
1
TCP/IP Settings:
IPv4 Setting
Exit
02
IPv6 Setting
03
Bonjour
04