Configure the settings – TA Triumph-Adler 2256 User Manual
Page 44
2-16
Installing and Setting up the Machine > Default Settings of the Machine
4
Press the [
▲
] or [
▼
] key to select [TCP/IP Settings], and press the [
OK
] key.
5
Press the [
▲
] or [
▼
] key to select [IPv4 Setting], and press the [
OK
] key.
2
Configure the settings.
When setting the static IP address
1
Press the [
▲
] or [
▼
] key to select [DHCP], and press the [
OK
] key.
2
Press the [
▲
] or [
▼
] key to select [Off], and press the [
OK
] key.
3
Press the [
▲
] or [
▼
] key to select [IP Address], and press the [
OK
] key.
4
Use the numeric keys or press the [
▲
] or [
▼
] key to set the IP address.
You can set any value between 000 and 255.
Increase or reduce the figures by pressing the [
▲
] or [
▼
] key. Use [
◄
] or [
►
] to move the position
being entered, which is shown highlighted.
5
Press the [
OK
] key.
2
1
Network Setting:
TCP/IP Settings
Exit
01
Secure Protocol
02
LAN Interface
03
2
1
TCP/IP Settings:
TCP/IP
Exit
01
IPv4 Setting
02
IPv6 Setting
03
2
1
IPv4 Setting:
DHCP
Exit
01
Auto-IP
02
IP Address
03
2
1
DHCP:
Off
01
On
02
*
IPv4 Setting:
IP Address
Exit
03
Auto-IP
02
DHCP
01
2
1
IP Address:
0.
0. 0. 0