RIGOL DS1000B - Manual (Page 80)

RIGOL
User’s Guide for DS1000B series 2-50
To Set up the Sampling System
Figure 2-59 shows, the Acquire button at the MENU of the front panel.
Figure 2-59
The Acquire setup button
Press Acquire button, the interface menu shows as follows:
Figure 2-60 Table 2-37 The Acquire menu
Menu Settings Comments
Acquisition
Normal
Average
Peak Detect Normal Acquisition mode.
Average Acquisition mode.
Peak Detect Acquisition mode.
Averages [1] 2 to 256
Set average times by N-th power
of 2 from 2 to 256.
Sampling
Real-Time
Equ-Time Real-time sampling mode.
Equivalent sampling mode.
Sinx/x [2]
ON
OFF Set the interpolation as Sinx/x.
Set the interpolation as linearity.
Sa Rate [3] Display sampling rate.
NOTES:
[1] This function appears when acquisition as “Average”.
[2] This function appears when sampling as “Real-Time”.
[3] Sample rate channels will be displayed respectively in alternative trigger mode.
Acquire Setup Button