Example 5: making cursor measurements, Example 5: making cursor measurements -6 – RIGOL DS1000B User Manual

Page 144

background image

RIGOL

User’s Guide for DS1000B Series

3-6

Example 5: Making Cursor Measurements



There are 22 build-in automatic measurements. They can also be conducted using
cursors to make time and voltage measurements of a waveform quickly.


Measure the Peak Frequency of the First Sinc Waveform

To measure the rising frequency at the rising edge of a signal, do these steps:
1. Press Cursor key to see the Cursor menu.
2. Press Mode to set Manual mode.
3. Press Type to select X.
4. Turn ( ) knob to place cursor A on the first peak of the wave.
5. Turn ( ) knob to place cursor B on the second peak of the wave.

Observe the data in time and frequency displayed on the screen.

Figure 3-4 Waveform display





See also other documents in the category RIGOL Measuring instruments: