Example 8: fft cursor measurement, Example 8: fft cursor measurement -12 – RIGOL DS1000B User Manual

Page 150

Text mode
Original mode

RIGOL

User’s Guide for DS1000B Series

3-12

Example 8: FFT Cursor Measurement

FFT measurements include: Amplitude measurement (V

RMS

or dBV

RMS

) and

Frequency measurement (Hz).

Do these steps as follows:
1. Press Cursor→Press No.1 button to set cursor mode to Manual.
2. Press No.2 button associated with Type to select X or Y.
3. Press button MATH→set operate mode as FFT.
4. Press Cursor →press No.3 button to specify source as MATH.
5. Turn ( ) knob to move the cursor A and cursor B to a point of interest.

Figure 3-9 Cursor Measurement (Type Y)

Figure 3-10 Cursor Measurement (Type X)