To display a signal automatically, To display a signal automatically -10 – RIGOL DS1000B User Manual

Page 22

Text mode
Original mode

RIGOL

User’s Guide for DS1000B series

1-10

To Display a Signal Automatically

The oscilloscope has an automated feature to display the input signal in best-fit
status. The input signal should be 50 Hz or higher and a duty cycle is greater than
1%.

Using the automatic setting:
1. Connect a signal to the oscilloscope (such as channel 1) as described above.
2. Press Auto.

The oscilloscope may change the current settings to display the signal; adjusts the
vertical and horizontal scaling, the trigger coupling, type, position, level, and mode.