RIGOL DS1000B - Manual (Page 111)

Command Systems RIGOL
Programming Guide for DS1000B Series 2-99
Function:
The command recalls the waveform or setup data from internal flash according
to storage type.
4. :SAVERECALL:SAVe
Command Format:
:SAVERECALL:SAVE
Function:
The command saves the waveform or setup to internal flash according to
storage type.
5. :SAVe:IMAGe:STARt
Command Format:
:SAVE:IMAGe:STARt
Function:
The command saves the image. The is the file name, which is
composed of double quotation marks and ASCII characters, also, the file name
length within the double quotation marks must less than 26 characters.
NOTE: The system will add the file format suffix with 4 characters automatically, which are
not included in 26 characters.
6. :SAVe:IMAGe:FACTors
Command Format:
:SAVE:IMAGe:FACTors {{1|ON}|{0|OFF}}
:SAVE:IMAGe:FACTors?
Function:
The command sets the saving function of system parameters on or off. The
function indicates to save a file which records all system parameters while
saving image.