Precision Digital PD6000 - Manual (Page 81)

Model PD6000 Analog Input Process Meter Instruction Manual
81
METER OPERATION
The meter is capable of accepting current (0-20 mA, 4-20 mA) and vol-
tage signals (0-5 V, 1-5 V, 0-10 V,
 10 V) and displaying these signals
in engineering units from -99999 to 999999 (e.g. a 4-20 mA signal could
be displayed as -50.000 to 50.000).
The dual-line display can be customized by the user to operate in such
a way as to satisfy a specific application. Typically the main display is
used for the process variable; while the second display is used engi-
neering units, custom legend, or set point indication.
The analog input can be scaled to display the process in two different
scales; for example the main display could indicate level in feet and the
second display could indicate the volume in gallons.
Additionally the meter can be set up to display the analog input on the
main display and the Modbus input on the second display. The relays
and analog output can be programmed to operate from the Modbus PV
input.
Front Panel Buttons Operation
Button
Symbol Description
Press to enter or exit Programming Mode,
view settings, or exit max/min readings
Press to reset max/min readings or other pa-
rameter/function assigned through the User
menu
Press to display max/min readings or other
parameter/function assigned through the User
menu
Press to acknowledge relays or other parame-
ters/function assigned through the User menu
Function Keys Operation
During operation, the programmable function keys operate according to
the way they have been programmed in the Advanced Features – User
menu.
The table above shows the factory default settings for F1, F2, and F3.