Precision Digital PD6000 - Manual (Page 38)

Model PD6000 Analog Input Process Meter Instruction Manual
38
Multi-Point Calibration & Scaling
The meter is set up at the factory for 2-point linear calibration. The
number of points for multi-point calibration/scaling is set up in the Ad-
vanced
Features menu. Up to 32 linearization points may be selected
for PV1 and up to 8 linearization points may be selected for PV2. See
page 72 for details.
MeterView
®
Pro Software
The meter can also be programmed using the PC-based MeterView Pro
software available for free download at www.predig.com.
Data logging for one meter at the time is available with MeterView Pro
software. More advanced data acquisition may be accomplished by
using any Modbus RTU compliant software.
In order to program the meter using a computer, the meter must be
connected using an RS-232 or RS-485 serial adapter, see ORDERING
INFORMATION on page 7 for details.