Precision Digital PD6000 - Manual (Page 26)

Model PD6000 Analog Input Process Meter Instruction Manual
26
Front Panel Buttons and Status LED Indicators
Button
Symbol Description LED Status
Menu 1-8 Alarm 1-8 indicator
Right arrow/F1 1-8-M
Flashing: Relay in
manual control mode
Up arrow/F2 M
Manual control relays
&/or analog output
Enter/F3 1-4
Flashing: Relay inter-
lock switch open
Note:
Alarms 5-8 are enabled when
relay expansion module is
installed. Note:
LEDs for relays in manual mode
flash with the “M” LED every 10
seconds.

Press the Menu button to enter or exit the Programming Mode at
any time.

Press the Right arrow button to move to the next digit during digit or
decimal point programming.

Press the Up arrow button to scroll through the menus, decimal
point, or to increment the value of a digit.

Press the Enter button to access a menu or to accept a setting.

Press and hold the Menu button for three seconds to access the
advanced features of the meter.