MCZ PowerTherm - Manual (Page 35)

PELLET STOVES Chapter 4
INSTALLATION AND USE MANUAL page 35
Operation Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
4.6. SETTINGS TO CARRY OUT BEFORE FIRST
LIGHTING
Once the power supply cable is connected into the back part of the
unit, bring the switch, located near to the emergency panel, to position
(I).
LED C of the emergency panel will light up red (FIXED LIGHT).
4.6.1. Setting current day and time
Simultaneously press buttons 4 and 6 of the remote control for 3
seconds with the stove on to access the menu for setting current day
and time.
When the message “CLOCK” appears it is possible to use button 5 to
select the current hour and confirm it with button 6, then the minutes
and confirm them with button 6 and then the day. Upon completion,
pres key 6 to confirm and exit the menu.
The following abbreviations are used for the days of the week:
MO = Monday Î
TU = Tuesday Î
WE = Wednesday Î
TH = Thursday Î
FR = Friday Î
SA = Saturday Î
SU = Sunday Î
If the keypad is not touched for 7 seconds, the
remote control will automatically exit time setting
mode and will confirm the last data inserted.
4.6.2. Setting the temperature unit of measure
The temperature unit of measure can be set to either Fahrenheit or
Celsius.
Only with the stove off, press button 4 for at least 5 seconds to
select the unit of temperature measurement, either Celsius (°C) or
Fahrenheit (°F).
The default setting of the remote control is degrees Celsius
(°C)