MCZ Philo - Manual (Page 28)

PELLET STOVES Chapter 5
USE AND MAINTENANCE MANUAL page
28
LCD remote control Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
5. LCD REMOTE CONTROL
5.1. Characteristics of the remote control
The remote control operates at a transmission frequency of 434.5MHz.
Power the product with three AAA batteries as follows:
Remove the cover of the battery compartment by pressing and lifting it
as shown by the arrow
Insert the batteries according to the correct polarity (+) and (-)
Close the cover of the battery compartment
When power is supplied to the remote control the time setting will
automatically be prompted (see paragraph 5.4.1).
The remote control tells the user when the batteries are about the run
out via the relevant icon on the display. If the flat battery icon appears,
this means that the batteries are almost flat and the remote control is
about to switch off.
5.2. Graphic appearance
In the instructions herein, we will often refer to the indications of the
buttons shown in the figure. For simplicity, always keep the figure to
hand.
Used batteries contain metals that are harmful to the
environment. Therefore, they must be disposed of
separately in suitable containers.
A
B
E
C
D D