MCZ Philo - Manual (Page 17)

PELLET STOVES Chapter 3
USE AND MAINTENANCE MANUAL page
17
Installation and assembly Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
3.1.2. Technical specifications
Technical specifications PHILO Comfort Air
Total heat output Max 9.0 kw / 7740 kcal
Total heat output Min: 3.2 kw / 2580 kcal
Max. output 87.8%
Min. output 93.6%
Max. temperature of smoke discharged 170 °C
Min. temperature of smoke discharged 90 °C
Particulate 28 mg/Nm 3 (13% O
2
)
19 mg/MJ
Min. and Max. CO at 13%O
²
0.042 – 0.012%
Min. and Max. CO at 13%O
²
6.0% - 9.2%
Min. and Max. smoke mass 4.0 - 7.9 g/sec
Minimum draught at Max. power 0.10 mbar – 10 Pa
Minimum draught at Min. power 0.05 mbar – 5 Pa
Tank capacity 27 litres
Type of pellet fuel 6-8 mm diameter pellet. With 5/30 mm size.
Hourly pellet consumption Min~0.7 kg/h* Max~2.0 kg/h*
Running time Min.~26 h* Max.~9 h*
Heatable volume m 3 194/40-221/35-258/30 **
Combustion air inlet External diameter 50 mm.
Smoke outlet External diameter 80 mm.
Maximum electricity consumption Max. 420 W – Med. 80 W
Voltage and frequency of power supply 230 Volt / 50 Hz
Net weight 135 Kg.
Weight with packaging 145 Kg.
*Data that may vary depending on the type of pellet used.
**Heatable volume according to the cal/m 3 requirement 40-35-30 (40-35-30 Kcal/h respectively for m 3 )
Product compliant with multiple flue installation.