MCZ Philo - Manual (Page 25)

PELLET STOVES Chapter 3
USE AND MAINTENANCE MANUAL page
25
Installation and assembly Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
3.6. FITTING THE AIR FILTER
The cylindrical filter is already fitted inside the stove.
If the filter needs cleaning loosen the screw with the knob located on
the air inlet tube, unthread the filter, clean it and then secure it by
locking the knob.
CAUTION!
Never operate the stove without the air filter. MCZ
bears no responsibility for any damages to internal
components caused by failure to respect this
instruction.
3.7. OPENING/ CLOSING THE DOOR
CAUTION!
The door must be closed properly for the stove to
operate correctly.
Thread the cold hand on the opening hook of the door into the Philo stove,
lift and pull.
3.8. ELECTRICAL CONNECTION
Connect the power supply cable first to the side of the stove and then to
an electrical socket on the wall.
The main switch located on the side of the stove is only used to switch on
the stove. When the stove is off we recommend that you keep it turned
off.
If the stove is not used for a period of time, remove
the power supply cable from the stove.
Fitting/ dismantling the air filter
Opening the Philo stove door
Electrical connection of the stove