Fitting the upper top – MCZ Philo User Manual
Page 24

PELLET STOVES
Chapter 3
USE AND MAINTENANCE MANUAL
page
24
Installation and assembly
Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
Fit the grilles as follows:
Take the grilles (C-D-F-G), which are identical, and fasten
them to the structure of the stove using 4 screws for each (2
per side). The screws are supplied. Do the same thing with
the central grille E.
3.5.2.
Fitting the upper top
The top is positioned by simply resting it on the structure of the stove.
To ensure that the handles are positioned and operate correctly, check
when positioning the top that the studs on the handle coincide with the
"triangle" ∆ of the structure.
The centring process is essential to the ability to direct the air in the
desired position.
1- POSITION OF THE “TRIANGOLO” ∆ TOWARDS THE BACK OF THE STOVE
2- POSITION OF THE handle STUD IN THE SAME POSITION AS THE "TRIANGLE" ∆