MCZ Philo - Manual (Page 18)

PELLET STOVES Chapter 3
USE AND MAINTENANCE MANUAL page
18
Installation and assembly Technical dept. - All rights reserved by MCZ Group S.p.A. - Reproduction prohibited
3.2. PREPARATION AND UNPACKING
The Philo stove is supplied in several packages:

The first package contains the stove (fig. 1)
 The second contains the painted steel front panel in 2 pieces
(fig. 2)
 The third contains the grille (fig. 4)
 The fourth contains the upper top (fig. 5)
The packages containing the grille and the top are placed together with
the stove in the same box (fig. 1). The package containing the front
panels is placed alongside the stove package (fig. 2).
Open the package and remove the five screws from the base of the
stove (3 screws at the front and 2 at the back). These screws secure
the stove to the pallet (fig. 6). To remove the two screws behind (on
the back of the stove), two larger eyelets have been made to allow you
to insert the wrench to undo the screws.
Position the stove in the chosen place, taking care to ensure that it
complies with the specifications.
Figure 1- Stove packaging (front view)
Figure 3 – Front panel package
Figure 6 - Removing the packaging screws
Figure 4 – Grille package
Figure 5 – Upper top package
Figure 2- Stove package (rear view)