Epson GT-30000 - Manual (Page 98)

92
Network Scanning
Setting Up Client Computers
To set up a client computer, you’ll need to know the IP address or host name of the
scanner server. Also, make sure the TCP/IP protocol is installed. (See Appendix A,
“Installing the TCP/IP Protocol,” for instructions.)
Installing EPSON TWAIN HS Network
You must install EPSON TWAIN HS Network on the client computer before the
client can use the network scanner. At the same time, you can install other software
that came with your scanner. Your scanner comes with a multi-user license (6) for
Presto! PageManager, an unlimited license for EPSON TWAIN HS Network and
TWAIN HS, and a single-user license for PixTools QuickScan and the ISIS driver. If
you want to install them on additional computers, please contact the software
manufacturer to purchase additional licenses.
The ISIS driver and PixTools QuickScan cannot be run over a network.
1. Insert the EPSON GT-30000 Scanner Software CD-ROM in the CD-ROM
drive. If the Select Language window doesn’t appear, double-click the My
Computer icon on your desktop, and then double-click the Epson CD-ROM
icon.
2. Make sure English is selected
and click OK . The Software
Setup window appears.