Epson GT-30000 - Manual (Page 69)

63
Chapter 4
Network Scanning
You can use EPSON Scan Server and EPSON TWAIN HS Network, two
applications on your EPSON GT-30000 Scanner Software CD-ROM, to share your
scanner with other users in a small workgroup.
Your network must have a scanner server (the Windows computer connected to the
scanner) and one or more client computers. Only one client computer at a time can
connect to the scanner server and access the scanner. However, you can have more
than one scanner and scanner server on a network, so clients can choose which
scanner to use.
Here are some other requirements for sharing a scanner:
■ The scanner server must be an IBM ® Pentium ® compatible PC running Windows
Me, Windows 2000, Windows 98, Windows 95, or Windows NT 4.0 with
Service Pack 3 or higher.
■ Client computers can be running Windows Me, Windows 2000, Windows 98,
Windows 95, or Windows NT 4.0.
■ Both the client computers and the scanner server must have a network interface
card installed, and must be running the TCP/IP protocol (see Appendix A for
instructions on installing the TCP/IP protocol).
■ EPSON Scan Server must be installed on the scanner server, and EPSON
TWAIN HS Network must be installed on client computers.
■ It is recommended the scan server have a static IP address.