beautypg.com

Placing a single original document – Epson GT-30000 User Manual

Page 63

background image

How to Scan

57

To load documents into the ADF, follow these steps:

1. Slide the edge guide all the way out.

2. Insert the document stack face up into the ADF until it meets resistance. Then

move the right edge guide so it is flush with the right edge of your document.

3. Continue with the scanning procedure on page 58.

Placing a Single Original Document

Follow these steps to position a single page:

1. Raise the ADF and place your

document face down on the
document table.

2. Position the document so the

horizontal and vertical edges are
carefully aligned with the scales on
the top and left side of the
document table.

3. Close the ADF slowly. Be careful

not to move the document.

top corner of
document