Epson GT-30000 - Manual (Page 71)

Network Scanning
65
Setting Up the Scanner Server
You can set up any Windows Me, Windows 2000, Windows 98, Windows 95, or
Windows NT 4.0 computer as a scanner server, as long as it has a network interface
card installed and is running the TCP/IP protocol.
Before you begin, make sure the scanner is unlocked and connected to the scanner
server (see Chapter 1, “Setting Up Your Scanner” for details). If you don’t have the
TCP/IP protocol installed on the scanner server, see Appendix A, “Installing the
TCP/IP Protocol.”
Follow the instructions for your operating system:
■ If you’re running Windows Me, continue with the next section.
■ If you’re running Windows 2000, go to page 71.
■ If you’re running Windows 98, go to page 76.
■ If you’re running Windows 95, go to page 83.
■ If you’re running Windows NT, go to page 88.