Testing your scanner’s operation – Epson GT-30000 User Manual

Page 22

Text mode
Original mode

Setting Up Your Scanner

Testing Your Scanner’s Operation

To make sure your scanner is working properly, it’s a good idea to turn it on before
you connect it to your computer.

The scanner’s voltage cannot be changed. If the label on the back of the
scanner does not display the correct voltage for your area, contact your
dealer. Do not plug in the power cord.

1. Plug the scanner’s power cord into a grounded electrical outlet. Then open the

ADF so you can see the operation of the carriage.

2. Press the

Operate

button to turn on the scanner.

The

READY

light on the scanner’s front panel flashes, and the scanner’s carriage

moves forward, then back. The

READY

light stays on when the scanner is ready

to scan.

If you turn off the scanner, wait at least 10 seconds before turning it back
on. Rapidly turning the scanner on and off can damage the scanner.

carriage home position

Operate button