Epson GT-30000 - Manual (Page 30)

24
Installing the Software
Installing the Software for Windows Me
Before you begin, make sure the GT-30000 is connected to your computer. Also,
make sure you’ve recalibrated your monitor to factory specifications (see your monitor
documentation for instructions).
This procedure automatically installs your EPSON TWAIN HS driver. You’ll be
asked to install your SCSI or IEEE 1394 driver at the beginning of installation.
Follow the instructions on the screen to install your SCSI or IEEE 1394 driver, or see
the documentation that came with your card.
You may be asked to insert your Windows CD-ROM during this procedure.
Make sure you have your Windows CD-ROM available, or know where to find the
Windows source files on your hard drive. If you need help locating your source files,
contact your computer manufacturer.
1. Turn on your scanner first, then turn on your computer.
2. When you see the window on the
right, select Specify the location of
the driver , and then click Next .
3. Insert the EPSON GT-30000
Scanning Tools CD-ROM in your
drive.
The Add New Hardware Wizard screen above illustrates a SCSI
connection and may look slightly different for IEEE 1394 connections.