Epson GT-30000 - Manual (Page 132)

126
Installing the TCP/IP Protocol
Installing the TCP/IP Protocol on
Windows NT 4.0
1. Open the Control Panel and double-click
the Network icon. If necessary, click the
Protocols tab.
2. Check that TCP/IP Protocol appears in
the list of network protocols.
If it appears in the list, go to “Assigning
an IP Address on Windows NT 4.0” on
page 127.
If you don’t see TCP/IP Protocol in the
list, continue with the next step.
3. Click the Add button. You see the
screen on the right.
4. Select TCP/IP Protocol and click OK .
5. Continue with the instructions in the
next section to assign an IP address.