Using the, Start button, Setting up the – Epson GT-30000 User Manual

Page 66: A start button

How to Scan

Using the

a Start Button

You can load a document in the scanner, press the

a Start button, and watch while

the assigned application starts and then scans your document.

This section shows you how to set up the

Start button to launch an application

which supports this feature.

The

a Start button features described in this chapter are only available

when you use EPSON TWAIN HS to access a scanner connected to
your computer and you are running Windows Me, Windows 2000, or
Windows 98. If you are running Windows 95 or Windows NT, the

Start button is disabled.

To use the

a Start button with a network scanner, the client computer

must start both the host application and EPSON TWAIN HS Network.
Pressing the

a Start button sends the scanned image to the client

computer currently connected to the scanner server, but does not
automatically launch any applications.

Setting Up the

Start Button

If you’re running Windows Me,
Windows 2000, or Windows 98,
whenever you press the

a Start button

you’ll see a window asking you to choose
which application to launch. To avoid
this window, make sure that only one
application is assigned to the

a Start

button.