Epson GT-30000 User Manual

Page 45

Installing the Software

If you’re done installing software, remove the EPSON GT-30000 Scanning Tools
CD-ROM and restart your computer. Then follow the instructions in the next
section to make sure your scanner is operating properly.

If you want to install the ISIS driver, PixTools QuickScan, or Presto! PageManager
continue with the instructions under “Installing Additional Software” on page 49.

Testing Your Scanner Connection (Windows 98)

You need to verify that your scanner was properly connected and the software was
installed correctly. Follow these steps to test scanner operation:

1. Open the Windows Control Panel and

double-click the

Scanners and

Cameras

icon to open the Scanners and

Cameras Properties window.

2. Make sure

EPSON GT-30000

is selected,

then click the

Properties

button.

3. If necessary, click the

General

tab. Click

the

Test Scanner or Camera

button. If

the scanner is operating properly,

Device

Ready

appears next to Status.

4. Click

to close the Properties window.