Sealey TA320 - Manual (Page 2)

TECHNICAL SPECIFICATION:
AC Voltage: 400mV, 4V, 40V, 400V, 1000V
DC Voltage: 400mV, 4V, 40V, 400V, 1000V
AC Current: 400µA, 4000µA, 40mA, 400mA, 10A
DC Current: 400µA, 4000µA, 40mA, 400mA, 10A
Capacitance: 40nF, 400nF, 4µF, 40µF, 400µF, 4000µF, 40mF
Frequency: 40Hz - 10KHz
Duty Cycle: 0.1 - 99.9%
Pulse Width: 100µs-100ms
Resistance: 400Ω, 4kΩ, 40kΩ, 400kΩ, 4MΩ, 40mΩ
Continuity: <35Ω
Temperature Range: -50°C to 1000°C, -58°F to 1832°F
Diode Check:
Yes
Back Light: Yes
Bar Graph Display: Yes
Display Hold: Yes
Auto-Ranging: Yes
Insulation Test:
125V, 250V, 500V, 1000V
PC Interface: Yes
Digit Height: 20mm
Auto Power Off: Yes
Low Battery Indicator: Yes
Batteries (supplied): 6 x 1.5V AA
Hi-Impact Case:
Yes
Size (L x W x D): 220 x 95 x 56mm
Weight: 700g
PC Compatibility: Windows 2000, XP, Win7, Vista
INTRODUCTION:
Specially designed for hybrid vehicles and conforms to EN61010 CAT III (1000 Volts)
and CAT IV (600 Volts). Unlike other multimeters this unit has an insulation test function
that allows testing of the insulation of the high voltage wires found on hybrid vehicles.
Can be used as a stand-alone device or linked wirelessly with a USB interface to a PC
or laptop enabling results to be graphed, saved or printed. Supplied with high voltage
probes, thermocouple and wireless USB cable. The unit also has the usual functions
expected on a high quality multimeter including true RMS (Root-Mean-Square) and IP67
waterproof rating.
Original Language Version
© Jack Sealey Limited TA320 Issue No.2(L) 17/06/14